This article tackles the frustrating issue of a Burris Veracity PH elevation knob that won't reset. We'll explore common causes, step-by-step troubleshooting, and potential solutions to get your scope back in working order. Knowing how to fix this problem can save you time, money, and frustration in the field. The Burris Veracity PH is known for its precision, so resolving this issue is crucial for maintaining accuracy.
Understanding the Burris Veracity PH Elevation Mechanism
Before diving into troubleshooting, let's briefly examine how the elevation knob on the Burris Veracity PH functions. This scope utilizes a precise, highly engineered system for adjusting elevation. The knob itself is connected to a series of internal gears and components. Any disruption to this delicate mechanism can prevent the knob from resetting properly to zero.
Common Causes for Elevation Knob Malfunction
Several factors can cause the elevation knob to fail to reset. These include:
- Mechanical Interference: Debris, dirt, or even a slight misalignment of internal parts can obstruct the reset mechanism.
- Damage: Impacts or drops can damage the internal components of the scope, rendering the reset function ineffective.
- Manufacturing Defect: While rare, manufacturing defects can sometimes cause this issue.
- Over-tightening: Over-tightening the elevation knob can potentially strain or damage the internal components.
Troubleshooting Your Burris Veracity PH Elevation Knob
If your Burris Veracity PH elevation knob isn't resetting, follow these steps methodically:
Step 1: Visual Inspection
Carefully inspect the scope for any signs of damage. Look for dents, scratches, or anything out of place. Even a minor impact can throw off the internal alignment. Pay close attention to the elevation knob itself; check for any signs of bending or damage.
Step 2: Cleaning the Scope
Use compressed air to gently blow away any dust, dirt, or debris that might be interfering with the mechanism. Avoid using harsh solvents or liquids, as these could damage the scope's internal components. A soft brush might be helpful for stubborn debris.
Step 3: Checking for Obstructions
With the scope mounted and sighted in, try gently rotating the elevation knob, paying close attention to the resistance. If you feel significant resistance or binding, there's likely an obstruction within the mechanism. Attempting further manipulation without professional help could worsen the issue.
Step 4: Testing in Different Conditions
Try using the scope in various conditions, ideally on a stable shooting rest. Sometimes, environmental factors (extreme temperatures, humidity) may exacerbate or temporarily mask the problem.
Step 5: Contact Burris Customer Service
If none of the above steps resolves the problem, your next step is to reach out to Burris customer service. They are often very helpful and can offer additional troubleshooting advice. Explain the issue clearly and provide the scope's serial number (found on the scope tube).
Prevention and Maintenance
To avoid encountering a non-resetting elevation knob, remember these preventative measures:
- Proper Handling: Avoid dropping or bumping the scope. Always handle it with care.
- Regular Cleaning: Periodically clean the scope to remove dust and debris.
- Avoid Over-Tightening: Tighten the elevation knob only to the point where it feels secure; avoid excessive force.
- Storage: Store your scope in a safe, dry place when not in use.
Conclusion: Resolving the Burris Veracity PH Elevation Issue
A malfunctioning elevation knob on your Burris Veracity PH can be frustrating, but by following these troubleshooting steps, you can often identify and resolve the problem. Remember to prioritize careful handling, regular maintenance, and don't hesitate to contact Burris customer service for assistance when needed. Your precision shooting depends on a properly functioning scope.